top of page
Nard-Compressori-Logo.png
Made-in-Italy copy.avif

+39 0444 159111

  • Youtube
  • LinkedIn
  • Instagram
  • Facebook
Oct 21
3 min read

A nitrogen booster raises gas pressure so you can store the gas and use it where you need it. In this installation, the BON2 does this inside a full working system. The gas starts at 200 bar (2900 psi). It ends in 12 bottles filled together at 300 bar (4351 psi). This post explains each stage, so you can see how the parts work as one system.


The BON2 high-pressure booster is paired with storage and the MFP module fill panel.
The BON2 high-pressure booster is paired with storage and the MFP module fill panel.

How the nitrogen booster system works

The video (below) follows the gas through six stages. In this post, “cylinders” means the storage cylinders and “bottles” means the 12 bottles you fill.

1.     Storage rack. A rack of previously installed high-pressure cylinders holds nitrogen at 200 bar (2900 psi).

2.     Pressure reducer. It lowers the pressure to 7 bar (102 psi) and feeds the booster.

3.     BON2 booster. It raises the pressure from 7 bar (102 psi) up to 350 bar (5076 psi).

4.     Storage cylinders. Two 50 L cylinders hold 100 L of high-pressure nitrogen at 300 bar (4351 psi).

5.     Modular Filling Panel (MFP). It takes gas from the storage cylinders and distributes it.

6.     Bottles. The MFP fills 12 bottles at the same time, each to 300 bar (4351 psi).


12-outlet Modular Fill Panel (MFP) equipped with individual fill gauges (manometers).
12-outlet Modular Fill Panel (MFP) equipped with individual fill gauges (manometers).

What the BON2 booster does

The BON2 series boosts gas pressure — air, nitrogen, and other inert gases. The BON2-55-350 in the video raises pressure up to 350 bar (5076 psi). The wider BON2 series goes up to 420 bar (6092 psi). The booster shown has the C frame, which is for indoor use and reduces sound.


Key features of the BON2:

  • An electronic control panel monitors temperature, oil level, current, inlet pressure and outlet pressure.

  • The control system tracks service intervals and the status of the filtration.

  • Oil pump lubrication is standard on all BON2 models.

  • Three-phase power is available at 230, 400, 440 and 480 V, at 50 or 60 Hz.


PAC3 filtration

The booster in the video is fitted with a PAC3 filter. A mechanical separator in the filter tower removes liquid before the gas reaches the filter media. The cartridge stages then target water vapor, oil vapor and larger particles. Filter cartridges are sold separately, so you choose them to suit your gas and your process.


Storage and the modular filling panel

Two 50 L cylinders store the boosted gas. The PA011-003 is a 50 L cylinder rated to 350 bar (5076 psi). Storage keeps nitrogen available when demand changes.


The MFP Modular Filling Panel has 12 filling positions in this application. Each position has its own valve and pressure gauge. A hose with a connector links each position to a bottle. The bottles stand in a filling cabinet with clear doors.

Video showing the BON2 workflow in this unique application.

Meet us at FABTECH

We are at FABTECH in Las Vegas from October 21 to 23, 2026. Find us in the Central Hall at booth C7739 in the Las Vegas Convention Center. Our team can answer your questions about nitrogen boosting, storage and filling.


Ready to plan your own system? Tell us your gas, your pressure and your flow, and we will help you choose the right booster.


Links of interest


Nardi Compressori: Made in Italy. Trusted Worldwide.

Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
Atlantic-BlueWorldTV-Arctic-Expedition.jpeg

BON2 & MFP in Action: Nitrogen Booster Fill 12 Bottles at Once

In this unique application, the BON2 is paired with high-pressure storage and the MFP modular fill panel to simultaneously fill 12 portable nitrogen cylinders.

bottom of page