Paintball · PCP Airguns · Airsoft
Shooting PG Gasoline High-Pressure Compressor
The Shooting PG range consists of gasoline-powered high-pressure compressors and is available with multiple pumping block options, including a four-stage version delivering up to 350 L/min (12.4 cfm). Each unit is built on an open, portable frame, making the Shooting PG well suited for mobile, outdoor, demanding applications. An optional trolley improves mobility.
Four Versions
Air Delivery: Up to 350 L/min (12.4 cfm)
Operating Pressure: 225 bar or 330 bar (3000 or 4500 psi)
Dual Pressure Option: Capable of simultaneously filling PCP/paintball bottles at 225 bar and 330 bar (3000 psi or 4500 psi)
Optional accessories include automatic condensate drains, auto stop, and electric start with key, along with additional filling whips that allow simultaneous filling of up to four bottles.
Standard Equipment
Highly reliable 6.7–10 kW (9–13 horsepower) gasoline engine
PAC-D filtration removes moisture from the compressed air, protecting valves, regulators, and bottles from corrosion. Filtration upgrades available.
Splash lubrication standard on Shooting PG 230 and PG 270
The open frame is lightweight and is designed for mobile, outdoor use. Optional handles and trolley make movement easier.
Standard version supplied with 4-fold filling device with 2 hose connections. 225 bar (3000 psi) connection type: DIN or INT (Yoke) or DIN with reduction INT (Yoke). Hose length: 1 m (3.3 ft).
Accessories/Upgrades
Optional on Shooting PG 230 and PG 270. Upgrade from splash lubrication to a dedicated oil pump system for continuous, pressurized lubrication. Improves cooling, extends component life, and maintains stable performance during long duty cycles or high-temperature operation.
Designed to monitor the engine's oil level and automatically shut down or prevent startup of the unit if the oil level falls below a safe threshold.
Automatic condensate drains, final pressure switch with automatic stop, and electric start with key.
Two output pressures on one compressor. Fill bottles at 225 bar (3000 psi) and 330 bar (4500 psi) from the same unit without swaps or downtime. Perfect for mixed-tank operations, pro shops, and rental facilities. Standard version supplied with 1 filling hose DIN 200 bar and 1 filling hose DIN 300 bar.
Support more fill lines simultaneously. Add up to two extra hose connections at either 225 bar (3000 psi) or 330 bar (4500 psi). Ideal for high throughput fill stations or team operations that need multiple bottles filled at once.
A clean, compliant solution for managing compressor condensate. This 12-liter sealed container safely collects oily water from automatic drains, preventing ground contamination and helping facilities meet environmental best practices.
Upgrade to oversized moisture-separation stages for longer filter life, better water removal, and cleaner final air quality. Recommended for humid climates, heavy-duty use, or operations demanding extended filtration intervals.
Available upgrade for gasoline and electric models with manual controls.
Upgrade your Shooting PG Series compressor to a higher-capacity PAC-D filtration system for drier air, longer cartridge life, and better performance in demanding conditions.
From PAC1-D to PAC2-D (PG 230–PG 300)
Move from the base PAC1-D filter to the larger PAC2-D system. This upgrade increases media volume, improves moisture removal, and extends service intervals.
From PAC1-D to PAC3-D (PG 230–PG 300)
Jump directly to the highest-capacity filtration option. The PAC3-D delivers maximum media volume and the longest cartridge life, making it the best choice for heavy use, hot or humid environments, and operators who want the most robust filtration.
From PAC2-D to PAC3-D (PG 350)
For higher-output models, upgrading from PAC2-D to PAC3-D offers the most substantial gain in moisture buffering and filter longevity.
Two fixed wheels and handle
Set of two.
Technical Specifications
